Explore Our Services

New construction electrical refers to the complete design, installation, and testing of electrical systems in newly built residential or commercial structures. It covers planning from the ground up to ensure safe, code-compliant, efficient power distribution, lighting, communications, and grounding systems. Key components and stages include:

• Planning and design

  • Load calculation: Determining total electrical demand (lighting, appliances, HVAC, specialized equipment) to size service panels, feeders, and conductors.

  • Service selection: Choosing appropriate service size (e.g., 100A, 200A, 400A) and whether single- or three-phase power is required for commercial sites.

  • Circuit layout: Locating outlets, switches, lighting, dedicated appliance circuits, and specialized circuits (e.g., EV chargers, HVAC units).

  • Future-proofing: Allocating space and conduit runs for future upgrades like home automation, extra circuits, EV charging, solar, or battery storage.

  • Code compliance: Designing to meet the National Electrical Code (NEC) and local amendments, including AFCI/GFCI protection, tamper-resistant receptacles, proper box fill, and accessible disconnects.

• Rough-in phase (before drywall)

  • Pathways and boxes: Installing conduit, cable runs, junction boxes, and electrical boxes for switches, receptacles, and fixtures.

  • Service equipment: Setting meter base, main service panel, subpanels, and grounding/bonding electrode systems (ground rods, UFER concrete encased electrode).

  • Low-voltage infrastructure: Running data, phone, coax, security, and audio/visual cabling as required.

  • HVAC and appliance hookups: Providing dedicated circuits and disconnects for air handlers, furnaces, water heaters, ranges, and other major equipment.

  • Inspections: Rough-in inspection by authority having jurisdiction (AHJ) to verify compliance before covering walls.

• Trim/finish phase (after drywall)

  • Device installation: Mounting switches, receptacles, lighting fixtures, panel covers, and faceplates.

  • Test and labeling: Energizing circuits, verifying voltages, testing AFCI/GFCI operation, and labeling breakers for identification.

  • Lighting control: Installing dimmers, timers, occupancy sensors, and smart controls as specified.

  • Power quality considerations: Addressing neutral and grounding continuity, surge protection, and balancing loads across phases and breakers.

• Service connection and final inspection

  • Utility

Remodel Electrical Services

Remodel electrical services cover the planning, updating, and installation of electrical systems during residential or commercial renovations. These services ensure that electrical work meets current codes, supports new layouts and appliances, and improves safety, efficiency, and functionality.

Key components

• Assessment and planning: Inspect existing electrical systems, identify limitations, and create a plan that matches the remodel scope. This includes load calculations, circuit mapping, and determining outlet, switch, lighting, and panel needs.

• Permits and code compliance: Prepare and obtain required permits, and perform work to meet the National Electrical Code (NEC) and local regulations. This reduces inspection delays and ensures safety and insurance compliance.

• Electrical panel upgrades: Replace or upgrade panels and breakers to accommodate increased load from new appliances, HVAC, or additional circuits. Upgrades may include installing circuit breakers, subpanels, or service capacity increases.

• Rewiring and cable replacement: Replace outdated or damaged wiring (including knob-and-tube, aluminum, or degraded insulation), install new circuits for added rooms or appliances, and reroute wiring to match new wall layouts.

• Lighting design and installation: Plan and install general, task, and accent lighting to match the remodel’s aesthetic and functional goals. Services include recessed lighting, pendant lights, track lighting, under-cabinet lighting, and dimmer or smart controls.

• Outlet and switch placement: Add or relocate outlets, GFCI and AFCI-protected receptacles where required, and install specialty outlets for appliances, EV chargers, and dedicated circuits for high-demand equipment.

• Smart home and automation: Integrate smart switches, thermostats, lighting controls, security systems, and whole-home automation to enhance convenience and energy management.

• Safety upgrades: Install smoke and carbon monoxide detectors, surge protection, tamper-resistant receptacles, ground fault protection, and equipment grounding to improve occupant safety.

• Specialty systems: Add or modify systems for home theaters, structured low-voltage wiring (data, phone, coax), EV charger circuits, backup generators, and dedicated circuits for workshops or commercial equipment.

• Testing and inspection: Perform circuit testing, load testing, and final inspections to verify proper operation and compliance. Provide documentation and labels for circuits and panels.

When to call a professional

• Structural changes or exposed wiring during renovations

• Adding rooms, kitchens, bathrooms, or major appliances

• Upgrading service capacity or replacing old panels/wiring

• Installing smart home systems, EV charging, or backup power

• If existing wiring is outdated or shows signs of damage

Benefits

• Safety: Professional work reduces fire and shock risks and ensures code compliance.

• Reliability: Properly sized circuits and quality installations reduce nuisance tripping and equipment failures.

• Value: Modern, code-compliant

Upgrade your home or business with smart switches — the simple, high-impact way to modernize lighting control, boost convenience, and save energy.

Why choose smart switches?

• Instant convenience: Control lights from wall, phone, voice assistant, or schedule. No more fumbling for switches after dark or trying to remember whether lights were left on.

• Energy savings: Automate lighting with occupancy sensors, schedules, or geofencing to reduce wasted power and lower utility bills.

• Enhanced comfort and ambiance: Set scenes and dimming levels for morning routines, movie nights, or business hours — consistent settings on demand.

• Improved safety and security: Program lights to simulate occupancy when away, or integrate exterior lighting with motion sensors for better perimeter safety.

• Retain familiar wall control: Unlike replacing entire fixtures, smart switches preserve tactile wall controls your family and guests already use while adding modern remote capabilities.

• Scalable & flexible: Start with a few key locations (entryways, living rooms, conference rooms) and expand as needs grow. Works with single-pole, 3-way/4-way, and multi-switch configurations when installed properly.

Integration advantages we provide

• Whole-home and commercial integration: We link smart switches with hubs, lighting systems, security, HVAC, and voice assistants for coordinated automation.

• Custom scenes and schedules: Tailored presets for daily routines, business operation hours, and event modes to fit exactly how you live and work.

• Professional wiring and compatibility checks: We ensure neutral/ground requirements, load handling, and 3-way wiring are correct to avoid flicker, compatibility issues, or safety hazards.

• Reliable networking: We assess Wi‑Fi and recommend mesh or dedicated systems where needed to maintain consistent smart switch responsiveness.

• Safe, code-compliant installation: Our electricians follow local codes and retrofit standards to deliver reliable performance and peace of mind.

• Future-proofing: We recommend devices and integration strategies that support firmware updates and evolving smart-home standards.